View 2SC5729_245932.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2SC5729
Transistor
Medium power transistor (30V, 0.5A)
2SC5729
Features 1) High speed switching. (Tf : Typ. : 50ns at IC = 500mA) 2) Low saturation voltage, typically (Typ. : 150mV at IC = 100mA, IB = 10mA) 3) Strong discharge power for inductive load and capacitance load. 4) Complements the 2SA2047 External dimensions (Units : mm)
(1)
0.65 0.65
UMT3
0.3
(3)
1.25 2.1
0.15
0.2
(2)
(1) Emitter (2) Base (3) Collector
0.1Min.
Each lead has same dimensions
Abbreviated symbol : UW
Applications Small signal low frequency amplifier High speed switching
Structure NPN Silicon epitaxial planar transistor
Packaging specifications
Package
Type Taping T106 3000
Code Basic ordering unit (pieces)
2SC5729
Absolute maximum ratings (Ta=25C)
Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Power dissipation Junction temperrature Range of storage temperature
1 Pw=10ms 2 Each terminal mounted on a recommended land.
Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg
Limits 30 30 6 0.5 1.0 200 150 -55 to +150
Unit V V V A A mW C C
1 2
0.7
0.9
1.3
2.0
Rev.A
1/3
2SC5729
Transistor
Electrical characteristics (Ta=25C)
Parameter Collector-base breakdown voltage Symbol BVCEO Min. 30 30 6 - - - 120 - - - - - Typ. - - - - - 150 - 300 5 40 120 50 Max. - - - 1.0 1.0 300 390 - - - - - Unit V V V A A mV - MHz pF ns ns ns IC=100A IC=1mA IE=100A VCB=20V VEB=4V IC=100mA, IB=10mA VCE=2V, IC=50mA VCE=10V, IE= -100mA, f=10MHz VCB=10V, IE=0A, f=1MHz IC=500mA IB1=50mA IB2= -50mA VCC ~ 25V Conditions
Collector-emitter breakdown voltage BVCBO Emitter-base breakdown voltage
BVEBO ICBO IEBO VCE(sat) hFE fT Cob Ton Tstg Tf
Collector cut-off current
Emitter cut-off current Collector-emitter staturation voltage
DC current gain Transition frequency Collector output capacitance Turn-on time Storage time Fall time
hFE RANK
Q 120-270 R 180-390
Electrical characteristic curves
10
Single non repoetitive pulse
1000
1000
Ta=25C VCC=25V IC/IB=10/1
VCE=2V
COLLECTOR CURRENT : IC (A)
1ms 10ms
1
Ta=125C
DC CURRENT GAIN : hFE
100ms
0.1
SWITCHING TIME (ns)
Tstg
DC
100
100
Ta=25C Ta=-40C
Tf Ton
0.01
0.001 0.1
1
10
100
10 0.01
0.1
1
10 0.001
0.01
0.1
1
COLLECTOR EMITTER VOLTAGE : VCE (V)
COLLECTOR CURRENT : IC (A)
COLLECTOR CURRENT : IC (A)
Fig.1 Safe operating area
1000
Fig.2 Switching Time
COLLECTOR SATURATION VOLTAGE : VCE (sat)
Fig.3 DC current gain vs. collector current
10
Ta=25C
10
IC/IB=10/1
DC CURRENT GAIN : hFE
VCE=5V
COLLECTOR SATURATION VOLTAGE : VCE(sat)
1
1
VCE=3V
100
IC/IB=100/1
VCE=2V
Ta=125C
0.1
Ta=25C Ta=-40C
0.1
IC/IB=20/1 IC/IB=10/1
0.01 0.001 0.01 0.1 1
10 0.001
0.01
0.1
1
0.01 0.001
0.01
0.1
1
COLLECTOR CURRENT : IC (A)
COLLECTOR CURRENT : IC (A)
COLLECTOR CURRENT : IC (A)
Fig.4 DC current gain vs. collector current
Fig.5 Collector-emitter saturation voltage vs. collector current
Fig.6 Collector-emitter saturation voltage vs. collector current
Rev.A
2/3
2SC5729
Transistor
1000
IC/IB=10/1
1
1000
TRANSITION FREQUENCY : fT (MHz)
VCE=2V
BASE EMITTER SATURATION VOLTAGE : VBE(sat)
Ta=25C VCE=10V
COLLECTOR CURRENT : IC (A)
Ta=-40C
Ta=25C
Ta=125C
Ta=25C
100
0.1
100
Ta=-40C
Ta=125C
10 0.001
0.01
0.01
0.1
1
0
0.5
1
1.5
2
10 -0.001
-0.01
-0.1
-1
COLLECTOR CURRENT : IC (A)
BASE TO EMITTER VOLTAGE : VBE (V)
EMITTER CURRENT : IE (A)
Fig.7 Base-emitter saturation voltage vs. collector current
Fig.8 Ground emitter propagation characteristics
Fig.9 Transition frequency
COLLECTOR OUTPUT CAPACITANCE : COB (pF)
100
Ta=25C f=1MHz
10
1 0.1
1
10
100
COLLECTOR TO BASE VOLTAGE : VCB (V)
Fig.10 Collector output capacitance
Switching characteristics measurement circuits
RL=50 VIN IB1 IC VCC 25V IB2 1%
PW PW 50 S Duty cycle
IB1 Base current waveform 90% Collector current waveform
Ton
IB2
IC 10%
Tstg Tf
Rev.A
3/3
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1

▲Up To Search▲

Price & Availability of 2SC5729

	To Download 2SC5729 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .